Home>Coldstore panels > ems-isolier® Paneel EM snap

ems-isolier® Paneel EM snap

ems-isolier® Paneel EM snap

ems-isolier®cold store panel EM snap

The ems-isolier® panel EM snap fulfils the additional requirements in the areas of accuracy of fit, assembly and behaviour in the event of a fire thanks to its Snap-In joint. This panel can be used in cooling, deep-freezing and blast chillers in the same way as the standard EM panel.

CE label

Zertifikat CE CE labelling is mandatory for products which are defined in a European standard. According to the Construction Products Regulations, they are associated with a performance statement which the manufacturer/supplier must provide to its customers without being requested. The information on the CE label can be made according to various procedures. They only determine which information must be provided. No minimum level is determined, therefore the CE label does not provide a quality mark and is also not monitored (internal or third-party).  

 
FM certificates

Zertifikat FM approved FM certificates are internal approvals by the American insurance company FM Global. It wishes to ensure that the insurance risk is minimised by the compliance with its requirements. The certificates are issued by the subsidiary company, FM Approvals, after various product tests have been carried out. FM Approvals has produced a set of rules specifically for these tests in which the product-specific tests of all kinds are described. Up until now, Hoesch Bausysteme has passed the fire tests in accordance with "FM 4880 for unlimited amounts" for all sandwich products which were in production in 2010. Here there is also an annual quality audit. Work is currently ongoing for a certificate for trapezoidal profiles and consideration is being given to an expansion of the certificate for the sandwich products in accordance with the FM standard 4881. Certified only for the internal use.

 
Fire protection classificationB-s1, d0

The ems-isolier® cold store panel with its PIR insulating core was the first building component with a polyurethanerigid foam insulating core to have achieved classification up to B-s1, d0 and fire resistance classes up to Al 60 in accordance with DIN en 13501-2, as well as a tested fire resistance class of e90.
 

ems-isolier® FIREtec® systems

Zertifikat Firetec ems-isolier® FIREtec® systems with PIR insulating cores do not add to a fire, they also help prevent a fire spreading further. They are self-extinguishing and are characterised by minimal smoke creation in the event of a fire. In this way they offer extensive levels of fire prevention with the highest insulation capacity, also contributing to a reduction in the insurance premiums.

Based on B-s1, d0

The ems-isolier® panel was the first in the market having reached the Reaction To Fire Classification B S1-d0 – the highest possible standard for polyurethane (IPN) core panels – as well as Fire Resistance Classes up to EI 60 and E 90 acc. to DIN EN 13501-2. All our PIR foam formulas are self-extinguishing and characterized by a minimum smoke development.

By using the ems-isolier® panel with its remarkable insulating potential and fire resistance features one can benefit from lower insurance rates and subsidizes often offered by Public Authorities.

Certified and approved

Steel with a coating which protects this quality permanently. Our panels usually have an additional organic sheet coating as well as a metallic coating.

DU 9002

DU 9002

SP 9002

SP 9002

SP 9010

SP 9010

SP 7016

SP 7016

SP 9006

SP 9006

SP 9007

SP 9007

SP 7035

SP 7035

SP 9001

SP 9001

STAINLESS STEEL

STAINLESS STEEL

 

Other colours on request!

Surfaces and textures

Surfaces
 

Surfaces EM snap

© 2016 - Hoesch Bausysteme GmbH | Created by Bluesoft